Encoding:

Format:

SHILOV ac, rs

Purpose:

Variable Shift of Accumulator Value Leaving the Result in the Same Accumulator

Shift the HI/LO paired value in an accumulator either left or right by the amount specified in a GPR, leaving the result in the same accumulator.

Description:

ac = ( GPR[rs]6..0 >= 0) ? (ac >> GPR[rs]6..0) : (ac << -GPR[rs]6..0)

The HI/LO register pair is treated as a single 64-bit accumulator that is shifted logically by shift bits, with the result of the shift written back to the source accumulator. The shift argument is provided by the six least-significant bits of register rs; the remaining bits of rs are ignored. The shift argument is interpreted as a six-bit signed integer: a positive argument results in a right shift of up to 31 bits, and a negative argument results in a left shift of up to 32 bits.

The value of ac can range from 0 to 3. When ac=0, this refers to the original HI/LO register pair of the MIPS32 architecture.

Restrictions:

No data-dependent exceptions are possible.

The operands must be values in the specified format. If they are not, the results are UNPREDICTABLE and the values of the operand vectors become UNPREDICTABLE.

Operation:

ValidateAccessToDSPResources()
sign = GPR[rs]5
shift5..0 = ( sign = 0 ? GPR[rs]5..0 : -GPR[rs]5..0 )
if ( shift5..0 = 0 ) then
   temp63..0 = ( HI[ac]31..0 || LO[ac]31..0 )
else
   if ( sign = 0 ) then
      temp63..0 = 0shift || (( HI[ac]31..0 || LO[ac]31..0 ) >> shift )
   else
      temp63..0 = (( HI[ac]31..0 || LO[ac]31..0 ) << shift ) || 0shift
   endif
endif
( HI[ac]31..0 || LO[ac]31..0 ) = temp63..32 || temp31..0

Exceptions:

Reserved Instruction, DSP Disabled