|
EXTEND 11110 |
00000 |
0 |
00 |
000 |
SHIFT 00110 |
rx |
0 |
sel = 6 |
SRL 10 |
|
5 |
5 |
1 |
2 |
3 |
5 |
3 |
3 |
3 |
2 |
MOVTN rx, $0 |
MIPS16e2 |
Move Conditional on T Not Equal to Zero Extended |
Move Zero Conditional on T Not Equal to Zero Extended
Test special register T and then conditionally move a GPR after testing a GPR value.
If T != 0, then GPR[rx] = 0
If the value in GPR[24] is not equal to 0, GPR rx is written with the value 0.
In implementations prior to MIPS16e2, this instruction yielded unpredictable results. It would typically be executed as an SRL instruction.
if GPR[24] != 0, then GPR[XLat[rx]] = 0 endif
None
The non-zero value tested might be the condition true result from the CMP or CMPI comparison instructions or a boolean value read from memory.