Encoding:

Format:

DPAQ_S.W.PH ac, rs, rt 

Purpose:

Dot Product with Accumulation on Fractional Halfword Elements

Element-wise multiplication of two vectors of fractional halfword elements and accumulation of the accumulated 32bit intermediate products into the specified 64-bit accumulator register, with saturation.

Description:

ac = ac + (sat32(rs31..16 * rt31..16) + sat32(rs15..0 * rt15..0))

Each of the two right-most Q15 fractional word values from registers rt and rs are multiplied together, and the results left-shifted by one bit position to generate two Q31 fractional format intermediate products. If both multiplicands for either of the multiplications are equal to -1.0 (0x8000 hexadecimal), the resulting intermediate product is saturated to the maximum positive Q31 fractional value (0x7FFFFFFF hexadecimal).

The two intermediate products are then sign-extended and summed to generate a 64-bit, Q32.31 fractional format dotproduct result that is accumulated into the specified 64-bit HI/LO accumulator to produce a final Q32.31 fractional result.

The value of ac can range from 0 to 3; a value of 0 refers to the original HI/LO register pair of the MIPS64 architecture.

If saturation occurs as a result of a h alfword multiplication, a 1 is written to o ne of bits 1 6 through 19 of the

DSPControl register, within the ouflag field. The value of ac determines which of these bits is set: bit 16 corresponds

to ac0, bit 17 to ac1, bit 18 to ac2, and bit 19 to ac3.

Restrictions:

No data-dependent exceptions are possible.

The operands must be values in the specified format. If they are not, the result is UNPREDICTABLE and the values of the operand vectors become UNPREDICTABLE.

Operation:

tempB31..0 = multiplyQ15Q15( ac, GPR[rs]31..16, GPR[rt]31..16 )
tempA31..0 = multiplyQ15Q15( ac, GPR[rs]15..0, GPR[rt]15..0 )
dotp63..0 = ( (tempB31)32 || tempB31..0 ) + ( (tempA31)32 || tempA31..0 )
tempC63..0 = ( HI[ac]31..0 || LO[ac]31..0 ) + dotp63..0
( HI[ac]63..0 || LO[ac]63..0 ) = (tempC63)32 || tempC63..32 || (tempC31)32 || tempC31..0
function multiplyQ15Q15( acc1..0, a15..0, b15..0 )
   if ( a15..0 = 0x8000 ) and ( b15..0 = 0x8000 ) then
      temp31..0 = 0x7FFFFFFF
      DSPControlouflag:16+acc = 1
   else
      temp31..0 = ( a15..0 * b15..0 ) << 1
   endif
   return temp31..0
endfunction multiplyQ15Q15

Exceptions:

Reserved Instruction, DSP Disabled