Opcode/ Instruction |
Op/En |
64/32 bit Mode Support |
CPUID Feature Flag |
Description |
66 0F 28 /r MOVAPD xmm1, xmm2/m128 |
A |
V/V |
SSE2 |
Move aligned packed double precision floating- point values from xmm2/mem to xmm1. |
66 0F 29 /r MOVAPD xmm2/m128, xmm1 |
B |
V/V |
SSE2 |
Move aligned packed double precision floating- point values from xmm1 to xmm2/mem. |
VEX.128.66.0F.WIG 28 /r VMOVAPD xmm1, xmm2/m128 |
A |
V/V |
AVX |
Move aligned packed double precision floating- point values from xmm2/mem to xmm1. |
VEX.128.66.0F.WIG 29 /r VMOVAPD xmm2/m128, xmm1 |
B |
V/V |
AVX |
Move aligned packed double precision floating- point values from xmm1 to xmm2/mem. |
VEX.256.66.0F.WIG 28 /r VMOVAPD ymm1, ymm2/m256 |
A |
V/V |
AVX |
Move aligned packed double precision floating- point values from ymm2/mem to ymm1. |
VEX.256.66.0F.WIG 29 /r VMOVAPD ymm2/m256, ymm1 |
B |
V/V |
AVX |
Move aligned packed double precision floating- point values from ymm1 to ymm2/mem. |
EVEX.128.66.0F.W1 28 /r VMOVAPD xmm1 {k1}{z}, xmm2/m128 |
C |
V/V |
AVX512VL AVX512F |
Move aligned packed double precision floating- point values from xmm2/m128 to xmm1 using writemask k1. |
EVEX.256.66.0F.W1 28 /r VMOVAPD ymm1 {k1}{z}, ymm2/m256 |
C |
V/V |
AVX512VL AVX512F |
Move aligned packed double precision floating- point values from ymm2/m256 to ymm1 using writemask k1. |
EVEX.512.66.0F.W1 28 /r VMOVAPD zmm1 {k1}{z}, zmm2/m512 |
C |
V/V |
AVX512F |
Move aligned packed double precision floating- point values from zmm2/m512 to zmm1 using writemask k1. |
EVEX.128.66.0F.W1 29 /r VMOVAPD xmm2/m128 {k1}{z}, xmm1 |
D |
V/V |
AVX512VL AVX512F |
Move aligned packed double precision floating- point values from xmm1 to xmm2/m128 using writemask k1. |
EVEX.256.66.0F.W1 29 /r VMOVAPD ymm2/m256 {k1}{z}, ymm1 |
D |
V/V |
AVX512VL AVX512F |
Move aligned packed double precision floating- point values from ymm1 to ymm2/m256 using writemask k1. |
EVEX.512.66.0F.W1 29 /r VMOVAPD zmm2/m512 {k1}{z}, zmm1 |
D |
V/V |
AVX512F |
Move aligned packed double precision floating- point values from zmm1 to zmm2/m512 using writemask k1. |
Op/En |
Tuple Type |
Operand 1 |
Operand 2 |
Operand 3 |
Operand 4 |
A |
N/A |
ModRM:reg (w) |
ModRM:r/m (r) |
N/A |
N/A |
B |
N/A |
ModRM:r/m (w) |
ModRM:reg (r) |
N/A |
N/A |
C |
Full Mem |
ModRM:reg (w) |
ModRM:r/m (r) |
N/A |
N/A |
D |
Full Mem |
ModRM:r/m (w) |
ModRM:reg (r) |
N/A |
N/A |
Moves 2, 4 or 8 double precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load an XMM, YMM or ZMM register from an 128-bit, 256- bit or 512-bit memory location, to store the contents of an XMM, YMM or ZMM register into a 128-bit, 256-bit or 512-bit memory location, or to move data between two XMM, two YMM or two ZMM registers.
When the source or destination operand is a memory operand, the operand must be aligned on a 16-byte (128-bit versions), 32-byte (256-bit version) or 64-byte (EVEX.512 encoded version) boundary or a general-protection
exception (#GP) will be generated. For EVEX encoded versions, the operand must be aligned to the size of the memory operand. To move double precision floating-point values to and from unaligned memory locations, use the VMOVUPD instruction.
Note: VEX.vvvv and EVEX.vvvv are reserved and must be 1111b otherwise instructions will #UD.
EVEX.512 encoded version:
Moves 512 bits of packed double precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load a ZMM register from a 512-bit float64 memory location, to store the contents of a ZMM register into a 512-bit float64 memory location, or to move data between two ZMM registers. When the source or destination operand is a memory operand, the operand must be aligned on a 64-byte boundary or a general-protection exception (#GP) will be generated. To move single precision floating-point values to and from unaligned memory locations, use the VMOVUPD instruction.
VEX.256 and EVEX.256 encoded versions:
Moves 256 bits of packed double precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load a YMM register from a 256-bit memory location, to store the contents of a YMM register into a 256-bit memory location, or to move data between two YMM registers. When the source or destination operand is a memory operand, the operand must be aligned on a 32-byte boundary or a general-protection exception (#GP) will be generated. To move double precision floating-point values to and from unaligned memory locations, use the VMOVUPD instruction.
128-bit versions:
Moves 128 bits of packed double precision floating-point values from the source operand (second operand) to the destination operand (first operand). This instruction can be used to load an XMM register from a 128-bit memory location, to store the contents of an XMM register into a 128-bit memory location, or to move data between two XMM registers. When the source or destination operand is a memory operand, the operand must be aligned on a 16-byte boundary or a general-protection exception (#GP) will be generated. To move single precision floating- point values to and from unaligned memory locations, use the VMOVUPD instruction.
128-bit Legacy SSE version: Bits (MAXVL-1:128) of the corresponding ZMM destination register remain unchanged.
(E)VEX.128 encoded version: Bits (MAXVL-1:128) of the destination ZMM register destination are zeroed.
(KL, VL) = (2, 128), (4, 256), (8, 512) FOR j := 0 TO KL-1 i := j * 64 IF k1[j] OR *no writemask* THEN DEST[i+63:i] := SRC[i+63:i] ELSE IF *merging-masking* ; merging-masking THEN *DEST[i+63:i] remains unchanged* ELSE DEST[i+63:i] := 0 ; zeroing-masking FI FI; ENDFOR DEST[MAXVL-1:VL] := 0
(KL, VL) = (2, 128), (4, 256), (8, 512) FOR j := 0 TO KL-1 i := j * 64 IF k1[j] OR *no writemask* THEN DEST[i+63:i] := SRC[i+63:i] ELSE ELSE *DEST[i+63:i] remains unchanged* ; merging-masking FI; ENDFOR;
(KL, VL) = (2, 128), (4, 256), (8, 512) FOR j := 0 TO KL-1 i := j * 64 IF k1[j] OR *no writemask* THEN DEST[i+63:i] := SRC[i+63:i] ELSE IF *merging-masking* ; merging-masking THEN *DEST[i+63:i] remains unchanged* ELSE DEST[i+63:i] := 0 ; zeroing-masking FI FI; ENDFOR DEST[MAXVL-1:VL] := 0
DEST[255:0] := SRC[255:0] DEST[MAXVL-1:256] := 0
DEST[255:0] := SRC[255:0]
DEST[127:0] := SRC[127:0] DEST[MAXVL-1:128] := 0
DEST[127:0] := SRC[127:0] DEST[MAXVL-1:128] (Unmodified)
DEST[127:0] := SRC[127:0]
VMOVAPD __m512d _mm512_load_pd( void * m); VMOVAPD __m512d _mm512_mask_load_pd(__m512d s, __mmask8 k, void * m); VMOVAPD __m512d _mm512_maskz_load_pd( __mmask8 k, void * m); VMOVAPD void _mm512_store_pd( void * d, __m512d a); VMOVAPD void _mm512_mask_store_pd( void * d, __mmask8 k, __m512d a); VMOVAPD __m256d _mm256_mask_load_pd(__m256d s, __mmask8 k, void * m); VMOVAPD __m256d _mm256_maskz_load_pd( __mmask8 k, void * m); VMOVAPD void _mm256_mask_store_pd( void * d, __mmask8 k, __m256d a); VMOVAPD __m128d _mm_mask_load_pd(__m128d s, __mmask8 k, void * m); VMOVAPD __m128d _mm_maskz_load_pd( __mmask8 k, void * m); VMOVAPD void _mm_mask_store_pd( void * d, __mmask8 k, __m128d a); MOVAPD __m256d _mm256_load_pd (double * p); MOVAPD void _mm256_store_pd(double * p, __m256d a); MOVAPD __m128d _mm_load_pd (double * p); MOVAPD void _mm_store_pd(double * p, __m128d a);
None.
Non-EVEX-encoded instruction, see Exceptions Type1.SSE2 in Table 2-18, "Type 1 Class Exception Conditions." |
|
EVEX-encoded instruction, see Table 2-44, "Type E1 Class Exception Conditions." |
|
Additionally: |
|
#UD |
If EVEX.vvvv != 1111B or VEX.vvvv != 1111B. |